Most Booked New copper main · brass quarter-turn ball valve Main Water Shutoff Valve Replacement
Swap that 30-year-old gate valve for a modern quarter-turn ball valve you can actually move with one hand. Most installs finish in under two hours.
We replace failing main water shut-off valves and install smart automatic shut-off systems for Sacramento homes — so the next burst pipe, slab leak, or stuck valve gets stopped at the source instead of soaking your drywall. Licensed, insured, same-day appointments, and a one-hour install on most jobs.
A stuck main water shut-off valve and the absence of an automatic shut-off system are why a $40 hose failure becomes a $40,000 floor replacement. We replace failing main water shut-off valves and install smart automatic shut-offs that watch your line 24/7 — usually in the same visit.
Old gate valves seize after 10–15 years from mineral buildup. In a real leak emergency you'll be on the phone with us instead of stopping the water. We replace seized main water shut-offs with quarter-turn ball valves you can close with one hand — typically in under an hour.
If your only shut-off is in a crawlspace, behind drywall, or out at the curb, you don't actually have one — not in the 30 seconds you'd have during a burst pipe. We install a labeled, code-compliant main water shut-off valve in an accessible spot inside your home.
Burst supply lines at 2am — or while you're on vacation — cause the most expensive home insurance claims in California. A smart automatic shut-off installs on your main line, detects abnormal flow within seconds, and closes the valve before water reaches your subfloor.
We'll come out, locate every shut-off, exercise each one, and quote you on what (if anything) needs to happen — a valve replacement, an automatic shut-off install, or both. No pressure, no upsell.
Focused work, done right the first time. No upsells, no bait, no "while we're here" surprises.
Most Booked New copper main · brass quarter-turn ball valve Swap that 30-year-old gate valve for a modern quarter-turn ball valve you can actually move with one hand. Most installs finish in under two hours.
Whole-Home Protection Moen Flo smart auto shut-off · installed on your main A smart automatic shut-off lives on your main water line, monitors for abnormal flow 24/7, and closes the valve before a burst pipe reaches your subfloor. Wi-Fi alerts to your phone, vacation mode, daily pressure health checks — pays for itself the first time it catches a leak.
Quick Visit New hose bib · copper press fittings · brass shut-off Leaky, frozen, or seized outdoor faucet? We replace hose bibs with frost-free, anti-siphon models built to outlast the next NorCal winter.
Code-Compliant New brass PRV · 50–70 PSI · code-compliant High pressure wrecks fixtures and floods homes. We install or rebuild pressure reducing valves to keep your home between 50–70 PSI — code-compliant, warranty-backed.
We focus on water-line work — if it's related to the line that feeds your home, we probably do it. One call to find out.
Every install gets the same flat price, the same tidy job site, and the same 2-year warranty.
Before After 
Before After 
Before After No mystery pricing, no daylong waits, no muddy boots through the living room. We respect your home.
Pick a 2-hour window online or call. A real human confirms your appointment by phone or text.
We text when we're 20 min out. Booties on, tools laid out, full inspection before quoting.
You approve the price in writing. We do the work the same visit when possible.
Parts and labor guaranteed for 24 months. One call brings us back, no questions.
Pick a 2-hour window, drop a photo of the valve, and we'll handle the rest.
We don't do drain cleaning. We don't do remodels. We don't do strip-mall plumbing. We do one thing — the line that brings water into your home — and we do it better than anyone in the region.
Brothers Mark and Tony started this in 2014 after watching their mom's basement flood. Every truck has an owner inside it.
You see the number before we lift a wrench. No hourly clock-watching, no surprise add-ons.
Drop cloths down. Tools in the truck, not the hallway. We leave your home cleaner than we found it.
If you can find our shop on the map, you're inside our service area. No franchises, no national call centers.
Installing a quarter-turn ball valve Our 1962 gate valve was completely seized — we had no way to shut water off in an emergency. Mark replaced the whole assembly in 90 minutes and walked me through how to test it twice a year. Worth every penny.
Hose bib on the side of the house was leaking for months and the shutoff was so corroded I couldn't isolate it. They replaced both the hose bib and an aged-out section of line in one visit. Clean work, fair price.
Our water pressure was wrecking fixtures — a shower head literally blew off the wall. They tested the line, swapped in a new pressure reducing valve, and dialed us to 62 PSI. Three months later, zero issues.
Showed up 25 minutes after I called. Diagnosed a slow leak at the main, gave me a flat quote, and had it fixed before lunch. Honestly the easiest home repair I've ever paid for.
I had three plumbers come look at our pressure issue. These guys were the only ones who actually tested the PSI before quoting. New PRV, problem solved, half what the others wanted. Recommended to my whole street.
Same workmanship, same flat pricing, same 2-year warranty. Your turn.
If you can drive to us in half an hour, we can drive to you. Don't see your neighborhood? Call — chances are we're already in the area.
Still have a question? Call us anytime — we answer the phone ourselves.
Try it. Turn it clockwise until it stops, then check the kitchen tap. If water still flows or the handle won't move easily, the valve is failing. Gate valves over 15 years old should be replaced as preventive maintenance — they fail closed, not open.
Main shutoff valve replacement runs $385–$625 flat. Hose-bib replacement is typically $185–$325. Pressure reducing valve replacement averages $425–$725 depending on assembly. All flat-rate, written upfront on-site — you only pay if you approve.
The hose bib is the outdoor faucet you screw the garden hose into. They fail from internal corrosion, freeze damage, or a worn packing nut. We swap them for frost-free, anti-siphon models that won't burst when the temperature drops.
Banging pipes, fixtures that drip after you turn them off, leaky toilet flappers, and shower heads that lose force are all signs. We hook a gauge to the hose bib — if you're reading above 80 PSI, the PRV needs to be rebuilt or replaced.
Almost never. Most valve work happens where the main enters your home. For exterior shutoffs we use spot excavation — a 2×2 ft access pit we backfill and re-sod when done.
Two years on parts and labor for everything we install. If anything we touched fails inside that window, one call brings us back and we make it right — no diagnostic fees, no fine print.
Book a same-week visit or call our 24/7 emergency line. Real plumbers. Real answers. Real fast.